[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: bulk toroid order 24 x 12 x 6 inch size



Original poster: "Arpit Thomas" <arpit-at-inzo-dot-org> 

May I offer another suggestion I've thought of? WOuld taking a motorcycle 
inner tube and inflating it to say, 1.5 times its nominal diameter, then 
covering it with paper mache and aluminium tape before deflating it be a 
feasable option?

*********** REPLY SEPARATOR  ***********

On 13/06/2004 at 11:17 PM Tesla list wrote:

 >Original poster: "James" <mustang3-at-cox-dot-net>
 >
 >Hi D.C., list,
 >     Thanks, for the tip. I've working some designs over in my head. I
 >think
 >the quartering section of of plywood is a great idea. I was thinking of all
 >styrofoam.
 >
 >James
 >----- Original Message -----
 >From: "Tesla list" <tesla-at-pupman-dot-com>
 >To: <tesla-at-pupman-dot-com>
 >Sent: Saturday, June 12, 2004 7:18 PM
 >Subject: Re: bulk toroid order 24 x 12 x 6 inch size
 >
 >
 > > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 > >
 > >
 > > Use a flatplate of 1/2 inch plywood, the two quartering section also out
 >of
 > > plywood, with the balance out of styrofoam and they are quite sturdy.
 > >
 > > Dr. Resonance
 > >
 > > Resonance Research Corporation
 > > E11870 Shadylane Rd.
 > > Baraboo   WI   53913
 > > ----- Original Message -----
 > > From: "Tesla list" <tesla-at-pupman-dot-com>
 > > To: <tesla-at-pupman-dot-com>
 > > Sent: Wednesday, June 09, 2004 7:40 AM
 > > Subject: Re: bulk toroid order 24 x 12 x 6 inch size
 > >
 > >
 > >  > Original poster: "James" <mustang3-at-cox-dot-net>
 > >  >
 > >  > Hi list, D.C.,
 > >  >      I need a bigger toroid. I'd be interested in 36 X 12 X 12 or
 >similar.
 > >  > I'm gonna work one up with chicken wire and foam insulation. The
 >problem
 > > is,
 > >  > the chicken wire toroids are not very sturdy.
 > >  >
 > >  > Later,
 > >  >
 > >  > James
 > >  > ----- Original Message -----
 > >  > From: "Tesla list" <tesla-at-pupman-dot-com>
 > >  > To: <tesla-at-pupman-dot-com>
 > >  > Sent: Tuesday, June 08, 2004 9:34 PM
 > >  > Subject: bulk toroid order 24 x 12 x 6 inch size
 > >  >
 > >  >
 > >  >  > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 > >  >  >
 > >  >  >
 > >  >  > Anyone else want to get in on the bulk toroid order?  Size is 24 x
 >12 x
 > > 6
 > >  >  > inch.  Spun aluminum.
 > >  >  >
 > >  >  > Last call ---- I need to enter the quantity by noon tomorrow.
 >Price
 > > with
 > >  >  > shipping delivered anywhere is US is $306.50.  That's vs. $420 on
 >a
 > > single
 > >  >  > order quantity.
 > >  >  >
 > >  >  > Dr. Resonance
 > >  >  >
 > >  >  > Resonance Research Corporation
 > >  >  > E11870 Shadylane Rd.
 > >  >  > Baraboo   WI   53913
 > >  >  >
 > >  >  >
 > >  >  >
 > >  >
 > >  >
 > >  >
 > >
 > >