[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Homemade coil winding lathe



Original poster: Ed Phillips <evp-at-pacbell-dot-net> 

"Hi,

The all-thread screw rod my tend to grab and push the upright 2x4s as it
turns.  I sleeved mine with copper pipe inserts.  Maybe some candle wax
would let it slip ok too.

Cheers,

          Terry"

	I cheated.  Turned the two ends of the threaded rod down root of the
threads to eliminate most of the threads and run them through 1/2" brass
plate to serve as bearings.

Ed