[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SSTC For Sale (no it's not a plasma sonic ;-))
Original poster: Kreso Bukvic <kreso.bukvic-at-kc.htnet.hr>
cannot find your e-mail! Please contact me off list!
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
Sent: Monday, March 08, 2004 5:07 AM
Subject: SSTC For Sale (no it's not a plasma sonic ;-))
> Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net>
> Okay, I'll bite.
> For Sale: My First SSTC. It is a self resonant design based on Aron and
> Justin's feedback SSTC design. Uses a bridge of IGBTs rather then MOSFETs
> and it works great, will strike a 21" grounded target. Base is 1" Oak
> board routed with a round-over edge, and sanded smooth. There are some
> burn spots where I held the router on too long, they wouldn't sand out,
> they aren't prominent. I will add receptcals on the coil itself simmilar
> PC powersupply plugs, that way you can remove the cord if you want to.
> If anyone is interested, you have my email.
> - Spark Picture
> - Large pic of complete coil
> - pic of coil in test area
> - Close up of H bridge
> - Close up of driver circuitry
> - Close up of base.
> Regards - Jim Mitchell