[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Steve Ward's email address...



Original poster: "Steven Ward" <srward16-at-hotmail-dot-com> 

Sorry Kreso, you were close, but my email is

srward16-at-hotmail-dot-com

Brett, just drop me a line with any questions.  You can really get a lot 
with a 304TL if you use it right ;-)

Steve


>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Re: Steve Ward's email address...
>Date: Sat, 27 Mar 2004 11:42:39 -0700
>
>Original poster: Kreso Bukvic <kreso.bukvic-at-kc.htnet.hr>
>
>His e-mail is on his page? Maybe you missed it ? Anyhow here it is
>srward18-at-hotmail-dot-com!
>
>Best Regards
>
>Kreso Bukvic
>
>Ps - great guy for help he is also helping me to build a SSTC :-)
>
>
>----- Original Message -----
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: <tesla-at-pupman-dot-com>
>Sent: Saturday, March 27, 2004 5:52 PM
>Subject: Steve Ward's email address...
>
>
> > Original poster: Brett Miller <brmtesla2-at-yahoo-dot-com>
> >
> > This message is for Steve Ward:
> >
> > I looked everywhere on your hot-streamer site and
> > failed to find your email address.  I have some things
> > to ask you regarding my current undertaking of the
> > construction of a 304tl VTTC.  I was fortunate enough
> > recently to have a fellow ham radio operator give me
> > an Eimac 304tl for free.  I had been wanting to start
> > a VTTC project for some time, and when I mentioned I
> > was looking for large tubes on a local repeater, I guy
> > came back to me about the 304tl.  We drove out and
> > met, and he just handed me the tube.  It was amazing
> > and generous to say the least.
> >
> > Anyway, I would like to talk to you (Steve) about the
> > 304tl project, a little bit off list and probably on
> > list after the project gets going and becomes
> > interesting.
> >
> > I would like to congratulate you on having one of the
> > most fun and interesting TC websites I've ever seen.
> > You have really gone out of the box and innovated with
> > some of your projects.  I would like to replicate your
> > work with the mini SSTC in the future as in
> > introduction to solid state tc experimentation.  The
> > farthest I've gone in that direction is building the
> > good 'ol one and two 2n3055 flyback drivers.  Let me
> > know your email address so we can communicate off
> > list.  Thanks!
> >
> > -Brett
> >