[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Waveform Generators - Any interest in BULK board / enclosure purchase ? ? ?



Original poster: "Nick Andrews" <nicothefabulous-at-hotmail-dot-com> 

I would be interested as well.

Nick Andrews


>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: RE: Waveform Generators - Any interest in BULK board /
>enclosure  purchase  ? ? ?
>Date: Tue, 04 May 2004 07:38:46 -0600
>
>Original poster: "Cody Carse" <cac619-at-earthlink-dot-net>
>
>You can definitely count me in for one.
>
>-----Original Message-----
>From: Tesla list [mailto:tesla-at-pupman-dot-com]
>Sent: Monday, May 03, 2004 10:18 AM
>To: tesla-at-pupman-dot-com
>Subject: Re: Waveform Generators - Any interest in BULK board / enclosure
>purchase ? ? ?
>
>Original poster: "Eastern Voltage Research Corporation"
><dhmccauley-at-easternvoltageresearch-dot-com>
>
>
>If I did it, the PCB would probably be about $20.00 and the custom front
>panel would be about $15.
>
>Dan
>
>
>  > As long as its no ridiculously expensive, I'd want one!
>  >
>  > ---Eric
>  > ----- Original Message -----
>  > From: "Tesla list" <tesla-at-pupman-dot-com>
>  > To: <tesla-at-pupman-dot-com>
>  > Sent: Saturday, May 01, 2004 5:12 PM
>  > Subject: Waveform Generators - Any interest in BULK board / enclosure
>  > purchase ? ? ?
>  >
>  >
>  >  > Original poster: "Eastern Voltage Research Corporation"
>  > <dhmccauley-at-easternvoltageresearch-dot-com>
>  >  >
>  >  > I've been thinking about designing a high quality waveform generator
>for
>  >  > sometime now and wanted to find out
>  >  > if there is any interest on the group for possibly a bulk board /
>front
>  >  > panel purchase.
>  >  >
>  >  > Basically, I would propose designing a PCB board and also a customized
>  > front
>  >  > panel (to fit a nice off-the-shelf Hammond enclosure box) and sell
>them
>  >  > together.
>  >  >
>  >  > The function generator would basically have:
>  >  > Sine Wave
>  >  > Square Wave
>  >  > Triangle Wave
>  >  > Pulse (adj Duty)
>  >  > Sawtooth Wave
>  >  >
>  >  > Initially 0-5VDC with adjustable OFFSET output with the possibility of
>  > going
>  >  > with a power stage for high voltage output.
>  >  > It would also be PLL synthesized with a crystal for high accuracy and
>  >  > possibly an LCD PIC interface.
>  >  >
>  >  > I haven't made any decisions on whether i'll do this or not, but if
>there
>  > is
>  >  > enough interest, i may consider pursuing it.
>  >  >
>  >  > Thanks
>  >  > Dan
>  >  >
>  >  >
>  >  >
>  >
>  >
>  >