[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Coil Form needed



Original poster: robert & june heidlebaugh <rheidlebaugh-at-desertgate-dot-com> 

PVC pipe is made in sizes up to 4 ft dia and 1.5 in thick, any plastic pipe
dealer can supply what you want.  Very low frequency coils can use a o.5 u
capacitor, just use lots of turns on your secondary. Or use two caps in
series.
    Robert   H
-- 


 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date: Wed, 12 May 2004 08:20:39 -0600
 > To: tesla-at-pupman-dot-com
 > Subject: Coil Form needed
 > Resent-From: tesla-at-pupman-dot-com
 > Resent-Date: Wed, 12 May 2004 08:27:26 -0600
 >
 > Original poster: "Paul Marshall" <klugmann-at-hotmail-dot-com>
 >
 > I am looking for a coil form 12" or greater diameter. The length should be
 > about 4 times the diameter. Also I am planning on using a 40kV .5uF
 > capacitor for the tank circuit. I have a 25kVA pig to drive it. Has anyone
 > on the list ever used that much capacitance in their tank circuit ?
 >
 >
 >
 > Paul S. Marshall
 >
 >