[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: WinTesla Question



Original poster: "Malcolm Watts" <m.j.watts-at-massey.ac.nz> 

Hi David,

On 14 Sep 2004, at 13:33, Tesla list wrote:

 > Original poster: "Harold Weiss" <hweiss-at-new.rr-dot-com>
 >
 > Hi All,
 >
 > I'm trying to resolve why my secondary resonates 15 KHz higher than
 > WinTesla predicted.  What I'm wondering about is, are the turns per
 > inch for the 97% calibrated for HAPTZ type magnet wire or just
 > standard wire?  I have been playing with the turns per inch, where
 > 47.26 tpi for 24 ga, has been replaced with 41.10 tpi to get the
 > measured frequency.  This represents a turn to turn spacing of .0028",
 > which might account for the double build wire thickness.  The only
 > other thing could be toroid hight above the secondary.

Is the terminal properly connected to the secondary?

Malcolm