[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: coupling coefficient

To: tesla-at-pupman-dot-com
Subject: Re: coupling coefficient
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 24 Sep 2004 18:50:59 -0600
Resent-Date: Fri, 24 Sep 2004 18:52:45 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <5pKsrD.A.SFC.JFMVBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 



Best performance should occur with sec coil elevated approx 2.5 inches above
the horizontal plane of the primary inductor.

Dr. Resonance

 >
 >
 > Secondary coil dia. is 6.25"
 >
 > Claude.
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Wednesday, September 22, 2004 11:42 PM
 > Subject: Re: coupling coefficient
 >  > What is the dia. of your secondary coil?   This is critical to setting
 >  > the best coeff. of coupling.
 >  >
 >  > Dr. Resonance
 >  >

Prev by Date: Re: another question about neon transformers and multipliers
Next by Date: 16 kV 250 mA TC transformers
Prev by thread: Re: coupling coefficient
Next by thread: Re: coupling coefficient
Index(es):
- Date
- Thread