[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Advice on Primary

Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>

That's what I did, though it's hard to see in this
photo. I used a tubing bender and got a nice smooth
large radius bend.


--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: "david baehr" <dfb25@xxxxxxxxxxx>
> That looks VERY NICE !!  The one thing I like to do
> is make a smooth bend
> of the tubing and take it right down through the
> base, that way I can make
> the  connections below ,....no sharp edges close to
> the secondary...........