[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Large Tesla Coil Construction Details - Comments Requested



Original poster: "Cameron B. Prince" <cplists@xxxxxxxxxx>

Hi Brett,

Thanks for the compliment. I like the clean simplicity of the ribbon primary
too. Gary Lau pointed out that bronze has a significantly higher resistance
than pure copper, so I'm a little concerned about that. It sure doesn't seem
to cause many problems for Terry Blake though.

I measured the primary and get the following:

Resistance: 0.4 Ohm
Inductance: .20 mH

Cameron

> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Wednesday, July 27, 2005 12:03 PM
> To: tesla@xxxxxxxxxx
> Subject: Re: Large Tesla Coil Construction Details - Comments
> Requested
>
> Original poster: Brett Miller <brmtesla2@xxxxxxxxx>
>
> Cameron,
>
> Hey!!! Looks great!  I really like your foam spaced bronze
> ribbon primary approach.
>
> -Brett
> www.hot-streamer.com/brett
>
> --- Tesla list <tesla@xxxxxxxxxx> wrote:
>
>  > Original poster: "Cameron B. Prince"
>  > <cplists@xxxxxxxxxx>
>  >
>  > Hey guys,
>  >
>  > Here's a link to a page I put up detailing the large  >
> Tesla coil I'm  > building. Please have a look and let me
> know what  > you think.
>  >
>  > http://www.epitra.com/tesla/index.html
>  >
>  > I look forward to any comments or suggestions.
>  >
>  > Thanks,
>  > Cameron
>  >
>  >
>  >