[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New type of coil needs a name... OL-DRSSTC 7

Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>

Hi all,

Hmm, "Terry coil" seems terribly informal. There's probably at least several hundred thousand "Terrys" on this planet. We
list members are definitely a close-knit community, hence the
wide knowledge and acceptance of the term "Terry Filter" Try asking someone outside the pupman list what a Terry
filter is, though! I would lean toward the "Terry Fritz Coil"
as a proper name. Why not? The "Richard Quick Gap" sure stuck with the copper tube segmented spark gap design and I'm
not even sure if Richard Quick truly "invented" that SG design.
Just my thoughts...

David Rieben


----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, October 16, 2005 11:51 AM
Subject: Re: New type of coil needs a name... OL-DRSSTC 7


Original poster: "Freddie Hamilton" <crzydmd@xxxxxxxxxxx>
Fritz Generator? Fritzoformer?? Terresonator???
...Um "Fritz Coil" is close, but how about simply the "Terry Coil"? The "Terry Filter" is well known, and this would follow that naming convention, and it almost sounds like "Tesla Coil". Terry Coil.
-fth

From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: New type of coil needs a name... OL-DRSSTC 7
Date: Sat, 15 Oct 2005 11:51:12 -0600

Original poster: "ENCIL" <clarams@xxxxxxxxxxx>

Why not simply a Fritz coil?

Yes Matt, I agree with you.

"The Fritz Coil"; that is a great choice.

WES