[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: NST protection filter
- To: tesla@xxxxxxxxxx
- Subject: Re: NST protection filter
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 12 Sep 2005 19:59:45 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Mon, 12 Sep 2005 20:08:27 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <MjqID.A.DyD.YSjJDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Esondrmn@xxxxxxx
Reminds me of the story my wife tells of how I originally told her
(10 years ago) that I would only be spending about $200.00 on my
Tesla coil project.
Ed Sonderman
In a message dated 9/10/05 11:01:24 AM Pacific Daylight Time,
tesla@xxxxxxxxxx writes:
Original poster: "Harold Weiss" <hweiss@xxxxxxxxxx>
Hi Dirk,
This hobby (sickness at times) definitely does suck the pocketbook
dry! But then again, so does just about any hobby.
David E Weiss
>Original poster: "Dirk Stubbs" <dirk@xxxxxxxxxxxxxx>
>
> >From the man himself. :) Thanks, Terry!
>
>After going to Digikey, the total parts cost $45 not including anything to
>mount them on. What type of board do you recommend? Digikey offers numerous
>types.
>
>Man this TC is nickel and dime'ing me to death. :) But I want to make sure
>it is a safe as can be.
>
>
>Dirk