[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Drawing
- To: tesla@xxxxxxxxxx
- Subject: Re: Drawing
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 29 Sep 2005 09:32:52 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- In-reply-to: <000301c5c506$df4e8d70$74dc5540@RichandDJs>
- Old-return-path: <vardin@twfpowerelectronics.com>
- References: <000301c5c506$df4e8d70$74dc5540@RichandDJs>
- Resent-date: Thu, 29 Sep 2005 09:32:25 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <aRqbNB.A.hSF.IkAPDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
It is just the free schematic drawing program from:
http://www.expresspcb.com/
It comes with their very nice PCB layout program. Simple
instructions are on-line there too.
Fast and easy to use. Unlike most such programs, they have not
screwed it up with 40,000,000 "features"....
I do print it out and scan the print since it looks better.
Cheers,
Terry
At 09:02 AM 9/29/2005, you wrote:
Greetings Terry ,
I know this has been discussed before but can you list
the name of your drafting program.
Rich , kd0zz