[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: INRUSH SURGE SUPRESION

To: tesla@xxxxxxxxxx
Subject: Re: INRUSH SURGE SUPRESION
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Thu, 13 Apr 2006 12:41:14 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Thu, 13 Apr 2006 12:28:58 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <WP4T9jFPS4M.A.O1B.qhpPEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>

It depends on your service. If you have a relatively
large breaker, you may be fine. The easiest way to
know is to test it. I have a 240 volt 100 amp breaker,
and have never had any problems with numerous setups.

Adam

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: "MIKE HARDY" <MHARDY@xxxxxxxxxx>
>
> I was wondering how important initial inrush
> suppresion is with a
> large variac? That is a large power resistor,
> shorted by contacts on
> a contactor shortly after power-up. I'm designing
> /building my
> controller for mu big TC. The variac is 3 , 30A/520V
> staco's in parallel.
>
>

>

Prev by Date: question on safety
Next by Date: RE: looking for CD 942 caps
Previous by thread: RE: INRUSH SURGE SUPRESION
Next by thread: transformer location
Index(es):
- Date
- Thread