[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Homemade Voltage Divider
Original poster: FIFTYGUY@xxxxxxx
In a message dated 2/1/06 2:46:22 PM Eastern Standard Time,
tesla@xxxxxxxxxx writes:
>I have it wired so that you apply power to open
>the shorting shunt, and, when that relay is OPEN,
>it triggers a microswitch, which then allows you
>to apply power to the HV transformer with a
>momentary contact type latching circuit.
I like your setup, Jim. Good failsafe features, and simple to implement.
-Phil LaBudde