[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 1350 KVA Current limiting



Original poster: "Rich & DJ" <rdj@xxxxxxxxxxxx>

You might be pulling a inductive load when you switch the variac in the
line. I had the same problem on a 120V 7 amp autotransformer on a 20 amp
line. It would work all day with no problem, but would pop the CB 50% of
the time when first plugged in. I rigged up a soft start system.

Rich , from the middle of Missouri

Subject: RE: 1350 KVA Current limiting


But my variac definitely says it is rated to 10 KVA.  So where is
my problem?  Why am I popping the fuses on the variac?