[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 1256D Paralleling Choke



Original poster: "Cameron B. Prince" <cplists@xxxxxxxxxx>

Hi Scot,

One of the websites I originally read about this subject was yours. You
don't give much information on the core size though.

Thanks,
Cameron

> Original poster: BunnyKiller <bunnikillr@xxxxxxx>
>
> Hey Cameron...
>
> Back again     had to update my website...
>
> see this page for wiring and info
>
>
> http://members.cox.net/bunnikillr/parallel.html
>
>
> Scot D
>
>
>
> Tesla list wrote:
>
> >Original poster: "Cameron B. Prince" <cplists@xxxxxxxxxx>
> >
> >Hey guys,
> >
> >I've got 2 1256's I've mechanically ganged together. I now need to build
> a
> >paralleling choke for them. I've read some posts and websites on how this
> is
> >done, but they talk about using an old variac as the core. I have a
> ferrite
> >torroid that measures 2.25 inches O.D. 1.50 inches I.D. and is .75 inches
> >wide. I believe the core is physically large enough to get 16 turns of
> 8AWG
> >around it, but I'm concerned if the core is magnetically large enough or
> >not. Any thoughts about this would be appreciated. I do have two of these
> >cores, so I could stack them and wind through both at once if need be.
> >
> >Thanks,
> >Cameron
> >
> >
>