[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Top load
Original poster: "Rich & DJ" <rdj@xxxxxxxxxxxx>
I am tweaking my 2nd coil I just completed. At low power about 50%
now, need to change my control box , I am overpowering my old control system.
My question is how much vertical displacement should be between
bottom of the top load and top of the secondary?? The secondary is
6 5/8 dia , the top load will be 4 flex tube approx 20" dia.
It will be 13Kv 150ma when complete , now low volts and RQ tube gap at .150.
Rich