Pure tunsten 1/2 inch (12.7 mm) at 1.5 inch (38.1mm) orslightly longer $15 each

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Hello All,

Anyone interested in making a community buy?

Hi Celina,
3-6-2006
Diamond Ground Products
Celina@xxxxxxxxxxxxxxxxx

I have made my 9/16x7? tungsten electrodes, 
blocks and heat sinks. I will only need 8 cut 
total pieces of the ½? (green,pure) stock. We 
spoke of 1.5? lengths but I would prefer these to 
be as long as possible out of the standard 7 inch 
rod. This of course is dependent on the diamond 
cutting blade thickness and tolerance. I 
understand the price to be $15.00 each and a lead 
time to be as long as 8 weeks. I also understand 
there is a 25 piece minimum. This being the case 
I will see if anyone on the Tesla discussion 
group would like to piggy back on the order.

Very truly yours,
Jim Mora
Ojai
805 701 7569