[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pure tunsten 1/2 inch (12.7 mm) at 1.5 inch (38.1mm) orslightly longer $1...



Original poster: Joe Smith <joesmith@xxxxxxxx>

I would be willing to buy 5 of them if I am not to late.
Regards
Joe Smith
Westpoint Monitor Repair
Westpoint,Texas 78963




At 04:58 PM 3/7/2006 -0700, you wrote:
Original poster: Mddeming@xxxxxxx
Hi Jim,

I'd take 4 if the deal is going through.

Matt D.


In a message dated 3/7/06 6:02:26 A.M. Eastern Standard Time, tesla@xxxxxxxxxx writes:
Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Hello All,

Anyone interested in making a community buy?

Hi Celina,
3-6-2006
Diamond Ground Products
Celina@xxxxxxxxxxxxxxxxx

I have made my 9/16x7â?? tungsten electrodes,
blocks and heat sinks. I will only need 8 cut
total pieces of the ½â?? (green,pure) stock. We
spoke of 1.5â?? lengths but I would prefer these to
be as long as possible out of the standard 7 inch
rod. This of course is dependent on the diamond
cutting blade thickness and tolerance. I
understand the price to be $15.00 each and a lead
time to be as long as 8 weeks. I also understand
there is a 25 piece minimum. This being the case
I will see if anyone on the Tesla discussion
group would like to piggy back on the order.

Very truly yours,
Jim Mora
Ojai
805 701 7569