Re: Hello

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Ed Phillips <evp@xxxxxxxxxxx>

Original poster: "Dr. Adriano Mollica" <adriano.mollica@xxxxxxxxxxx>

Hello, i recently tried to pilot a small tesla coil using an can ignition
coil directly, without success. but later i found this project that seems to
fix exactly in what are you looing for. try it, i didn't do yet.

http://www.uoguelph.ca/~antoon/circ/hv/ss-tesla/ss-tesla.html

bye bye"

   That seems like a lot of work for 2" sparks!  I suspect a smaller 
secondary with more turns would work better, as would a larger 
capacitor in the primary circuit with fewer turns on the primary.

Ed