[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: wire size question



Original poster: Mike <megavolts61@xxxxxxxxx>

Hi Russ,
The best size wire is probably a matter of opinion. Many would say choose the size that would give you somewhere between 1200 to 1500 turns and at a winding length between 20 and 25 inches. Usually 24 - 28g wire will fit this range. There is no set rule for this. A possible place to buy some would be a local motor winding shop, or look online and shop around.
Mike


I was just wondering what the best wire size would be to wrap a 5 "
secondary coil with.
and if any of yall know where a cheap place to buy it from.

thanks again
russ