Re: The Egg Works - Well, Almost

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: BunnyKiller <bunnikillr@xxxxxxx>

Hey All....

for those who have been following this thread,  lets stop a moment 
and THINK of whats happening here...  we are dealing with a toroidal 
core a single phase system with 90 degree opposed fields and a 
brass  hollow egg...

lets examine the situation

1.   egg not perfectly "shelled"  ( unbalanced)
2. 90 degree phase induction  ( only 2 opposing fields) per 4 fields 
( this would explain the "4 lobed" visual imbalance in the video)
3. Brass egg  ( copper offers the highest "reluctance" (( is that 
proper)) to magnetic fields... copper hates magnetic field changes it 
resists them thus the "drag" it induces.... and the movement it 
incurs..   reverse the situation and you see a movement of the copper 
compared to the "revolving" field..

What can be done to make it work as intended??

50%- 100% thick walled copper egg ( high "reluctantce" ??  opposition 
to magnetic fields influence  ( ( sp?)) )
4 or multiple of 4 phases ( coils) of inductors  maybe an 8 "phase 
coil system" would work better, instead of 4 do 8 windings
and POWER   think motor here...   stationary and rotor fields.... 
120vac @ 10+amps

eventually the egg ( copper at best ) would spin up to the 60Hz cycle 
induced by the fields created by the coils....

and you get The Egg of Columbus in its full glory

Scot D