[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Wardencyffe/Tunnels Re: Colorado Springs
Original poster: "BRIAN FOLEY" <ka1bbg@xxxxxxxxxxx>
Hi, ok thanks for the info, cul brian f.
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
Sent: Monday, April 23, 2007 3:26 PM
Subject: Re: Wardencyffe/Tunnels Re: Colorado Springs
> Original poster: David Thomson <dwt@xxxxxxxxxxxx>
> Tesla list wrote:
> >Original poster: "BRIAN FOLEY" <ka1bbg@xxxxxxxxxxx>
> >Hi, very interesting, thanks for the picture. what is the coil form made
> >cul brian f.
> The coil form is made from plywood that has been glued in layers and
> then turned on a lathe. Each cone was apparently made separate and
> then glued to a common disc. When I first saw the plywood, my
> thought was, "this can't be very old as plywood is a recent
> invention." Then I did some research on plywood and found out that
> it is another of a long list of ancient Chinese inventions. It was
> hard for me to believe they had commercial plywood factories at the
> end of the 1800s.
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.463 / Virus Database: 269.5.9/773 - Release Date: 4/22/07