[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: question about NSTs (fwd)



---------- Forwarded message ----------
Date: Tue, 7 Aug 2007 17:27:05 -0500
From: Drake Schutt <drake89@xxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: question about NSTs (fwd)

Yes they must have the same voltage but current does not matter.  i run a
12kv/30ma and a 12kv/60ma NST in parallel with no problems.

drake schutt
On 8/7/07, Tesla list <tesla@xxxxxxxxxx> wrote:
>
>
> ---------- Forwarded message ----------
> Date: Tue, 07 Aug 2007 14:42:01 -0500
> From: Matthew Boddicker <shmerpleton_town@xxxxxxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: question about NSTs
>
> Hi everyone, this is Matthew Boddicker.
>
> When putting NSTs in parallel to increase my input, does it matter if they
> have the same properties, i.e. output voltage and current? Thanks.
>
> Matthew Boddicker
>
> _________________________________________________________________
> See what you're getting into…before you go there
> http://newlivehotmail.com/?ocid=TXT_TAGHM_migration_HM_viral_preview_0507
>
>
>
>