[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: lot of capacitors (fwd)



---------- Forwarded message ----------
Date: Tue, 14 Aug 2007 21:14:33 +0300
From: Tomas.Stankevic@xxxxxxxx
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: lot of capacitors

Could you give me a link to some info how to build it and how it works?

By the way,caps are not 1kV but 5kV


Tomas



Quoting Tesla list <tesla@xxxxxxxxxx>:

>
> ---------- Forwarded message ----------
> Date: Sun, 12 Aug 2007 14:31:59 -0500
> From: resonance <resonance@xxxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: Laser and tesla coil (fwd)
>
>
>
> By connecting them in series and parallel you could build a 50 uF 10 kV DC
> electromagnetic soda can crusher.  Use an ignitron for switching and a 3
> turn #4 AWG coil for the "crush" coil.
>
>
> Dr. Resonance
>
> Resonance Research Corp.
> www.resonanceresearch.com
>
>
> ----- Original Message -----
> From: "Tesla list" <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Sunday, August 12, 2007 7:52 AM
> Subject: Re: Laser and tesla coil (fwd)
>
>
> >
> > ---------- Forwarded message ----------
> > Date: Sun, 12 Aug 2007 10:39:08 +0300
> > From: Tomas Stankevic <Tomas.Stankevic@xxxxxxxx>
> > To: Tesla list <tesla@xxxxxxxxxx>
> > Subject: Re: Laser and tesla coil (fwd)
> >
> > Hi, I have some caps, about fifty maybe. They are 1kV 100uF each, oil
> > filled. Each is about 40cm x 25cm x 15cm so the whole stack is about
> > 1x1x0.5 m (at least). Its really heavy. We used 2 cars, almost full
> > trunks to bring them.
> >
> > What can I do with them? Capacity is too big for Tesla coil...
> >
> > Tomas
> >
> >
> >
> >
>
>
>
>
>