[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Laser guided Tesla Coil
Original poster: "Gary Peterson" <g.peterson@xxxxxxxxxxxx>
Following Tesla's specification, an ultraviolet beam should be
used. This could be produced by a laser or an ultraviolet arc
lamp. The UV source could be mounted directly inside of the elevated
terminal, with electrical power being supplied by an air-motor
generator also installed there.
Perhaps the UV beam would only weakly ionize the air along its path
allowing the ionizing beam to extend outward or upward to a great
distance, with the following electrical discharge finishing the
job. It will be interesting to see if the UV beam can be shut off
once the more highly ionized conducting path between the transmitter
and the receiver is established.
As for application, mankind might try to move beyond the idea of
destroying things and consider the use of an ionizing UV beam within
the context of the transmission of electrical energy without wires as
a means for furthering universal peace.