[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 1st light
Original poster: "Gerry Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
Yes, change to a toroid or add a corona ring.
Original poster: "CajunCoiler" <cajuncoiler@xxxxxxxxxxx>
Well, for what it's worth, I've just completed assembly of "Kong Jr", my
3" SG coil. 1st light was not bad, but there's a bit of streamer breakout
at the top winding of the secondary coil.
See picture: http://msbdatasystems.com/Images/Images_cc/kongjr.jpg
Raising the topload a bit has cut back the top winding breakout, but there
is still more than I want. The topload (spherical) is currently located
3.5" above the top winding.
Any ideas on getting that erroneous breakout minimized?
BTW: Thanks to all on the list, who have helped me
on this project.
Christopher 'CajunCoiler' Mayeux
Panama City, FL USA