[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ARGH!!: broken wire



Original poster: Frosty <frosty90@xxxxxxxxx>

while winding a new secondary, the wire broke about 2/3 of the way up!! whats the best thing to do? if i join it is it best to have the end of the secondary closest to to the join as the base (ie closest to the primary) or use that end as the top to put the toroid on (it will be about 1.5" above the end of the coil..), also whats the best way to join the wire?
thanks for any help,
Jesse