[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Dead pig (fwd)



---------- Forwarded message ----------
Date: Tue, 26 Jun 2007 07:43:19 -0700
From: huil888 <huil888@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Dead pig (fwd)

It sounds like it might be best for all concerned if this pig were just 
allowed to remain "dead"  .......

Scott
----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Tuesday, June 26, 2007 6:40 AM
Subject: Re: Dead pig (fwd)


>
> ---------- Forwarded message ----------
> Date: Mon, 25 Jun 2007 21:00:12 -0500
> From: resonance <resonance@xxxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: Dead pig (fwd)
>
>
>
> You are not trying to run it without a series power reactor, are you?
>
> This would try to draw approx 650 Amps and certainly blow any breaker.
>
> Dr. Resonance
>
>
>> Date: Mon, 25 Jun 2007 21:20:27 +0000
>> From: David Rieben <drieben@xxxxxxxxxxx>
>> To: Tesla list <tesla@xxxxxxxxxx>
>> Cc: drieben@xxxxxxxxxx
>> Subject: Re: Dead pig (fwd)
>>
>> Gene,
>>
>> Are you sure that the pig is actually shorted? Does it immediately
>> trip your circuit box breaker at initial power up with or without
>> any load across its output terminals or does it just not put out
>> anything when powered up? Some pigs have an internalovercurrent
>> protection breaker on the low voltage side that can be tripped as
>> well as a bayonnet fuse inside one of the high voltage bushings
>> that can also be burnt out. If you provide us with a bit more info
>> we can probably at least figure out what's wrong with the piggy.
>>
>> David Rieben
>>
>> -------------- Original message -------------- 
>> From: "Tesla list" <tesla@xxxxxxxxxx>
>>
>>>
>>> ---------- Forwarded message ---------- 
>>> Date: Mon, 25 Jun 2007 12:05:49 -0700 (PDT)
>>> From: GENE GARRAGE
>>> To: tesla@xxxxxxxxxx
>>> Subject: Dead pig
>>>
>>> I have a shorted big pig .Does anybody know whats in there. Could i
>>> rewind what
>>> ever in there .I have a lathe an lots of wire & time. I paid 750 for 
>>> this
>>> BIG
>>> thing. tks gene HELP.
>>>
>>>
>>>
>>> --------------------------------- 
>>> Choose the right car based on your needs. Check out Yahoo! Autos new Car
>>> Finder
>>> tool.
>>>
>>>
>>
>>
>>
>
>
>
>
>