[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fraceformer internal repair? (fwd)



Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Fri, 25 May 2007 03:48:40 -0400 (EDT)
From: M G <gt4awd@xxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Fraceformer internal repair?

p {margin-top:0px;margin-bottom:0px;}
Hello list, this is mostly a re-post of my last post due to receiving no
replies, which seems to be getting more common for myself. I don't know
if my titles are just badly worded, or something else is going on here,
but if someone could please answer that would be great. The question has
been made to stand out if you would rather not read the rest.

Thank you.

" I was finally able to remove the core of the 15kv 30ma NST I've been
working on. It's been a long process. First I heated the core in oven,
which removed most of the tar, but not the tar holding the core in place.
After I soaked the opened case in kerosene for a little more than a week,
but this failed to remove the tar holding the core in. I then let the
case dry out for over three weeks, and finally today I heated the case
again, but in the grill this time.

After the core budged I set it on some aluminum foil. When I went to
trash the foil it still had some really hot tar on it. This ended up
accidentally getting on two of my fingers. It burned both areas really
good, and I couldn't remove the tar until it cooled. Make sure to use
some thick gloves when doing this kind of work, because burn! s really
are not fun.

-----------------------------------------------------------------------
Removing the core also tore off one of the high voltage
windings connection, but I believe this may be a simple fix. It seems the
connection was just attached to a metallic plate on the winding. If
anyone can verify this for me that would be great. The NST is a
Franceformer.
-----------------------------------------------------------------------

Well, considering I am typing with one and half hands I think I'll end
this here...

Thanks,
Matt G."

________________________________________________________________________________


Love Games? Gamesville is Waiting for You...
Free Online Games, Fat Cash $ Prizes
Plus Bingo, Solitaire, Poker& Much More! http://www.gamesville.com