[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: stove pipe top load. (fwd)



Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Wed, 30 May 2007 11:02:29 -0400
From: "Lau, Gary" <Gary.Lau@xxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: RE: stove pipe top load. (fwd)

I think the material is largely irrelevant.  But if you're using
standard stovepipe components, you're probably using elbows that will
have relatively sharp corners, and will promote breakout at these
points.  

Gary Lau
MA, USA

> Date: Tue, 29 May 2007 20:35:07 -0400
> From: Scott Bogard <teslas-intern@xxxxxxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: stove pipe top load.
> 
> Hey all,
>      Is there any disadvantage to using a top load made of galvanized
steel
> (aside from weight)?  Thanks.
> Scott Bogard.