[TCML] RSG disks - who can make them ?

["Chris Swinson" <list@xxxxxxxxxxxxxxxxxxxxxxxxx>]

Hi all,

Can anyone make (for me) a 24" RSG disc and drill a range of holes for my 
next range of experiments ? My engineering skills are very poor 
unfortunately , so wonder if anyone has the technology out there to make 
once accurately or know an engineering firm who could make one...

I was also thinking of a small disk with like a cross section of wood such 
as...

   |
--O--
   |


( if the ACSII art comes out right)

So I can have holes in the strips to alter the break rate of the electrodes. 
It could even be made larger but I think balancing is going to be a right 
pain at 3000RPM!

I know most will think it is a waste of time, though I do not think anyone 
has really experimented with break rates/dwell times. I would however like 
to conduct my own testing and document the results for the list...

Cheers,
Chris


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla