Re: Spacing (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Wed, 3 Oct 2007 14:28:22 -0700 (GMT-07:00)
From: penny831@xxxxxxxxxxxxx
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Spacing (fwd)

LOL, that was a typo, I meant on spacing them. How close to each other should they be mounted?

Tony

-----Original Message-----
>From: Tesla list <tesla@xxxxxxxxxx>
>Sent: Oct 3, 2007 1:44 PM
>To: tesla@xxxxxxxxxx
>Subject: Re: Spacing (fwd)
>
>
>---------- Forwarded message ----------
>Date: Wed, 3 Oct 2007 15:22:46 +0100
>From: Chris Swinson <list@xxxxxxxxxxxxxxxxxxxxxxxxx>
>To: Tesla list <tesla@xxxxxxxxxx>
>Subject: Re: Spacing (fwd)
>
>Hi Tony,
>
>Not sure what you mean by "un spacing them" ?
>
>If you are building a flate plate cap, then my page at 
>http://www.future-technologies.co.uk/IMPULSE/     may help.
>
>
>chris
>
>
>
>
>----- Original Message ----- 
>From: "Tesla list" <tesla@xxxxxxxxxx>
>To: <tesla@xxxxxxxxxx>
>Sent: Wednesday, October 03, 2007 2:58 PM
>Subject: Spacing (fwd)
>
>
>>
>> ---------- Forwarded message ----------
>> Date: Tue, 2 Oct 2007 07:07:03 -0700
>> From: Anthony R. Mollner <penny831@xxxxxxxxxxxxx>
>> To: Tesla list <tesla@xxxxxxxxxx>
>> Subject: Spacing
>>
>> Hello all!
>>  I'm about to drill out a bunch of plastic for my capacitor bank and I
>> wondered what the consensus is un spacing them? Do I need to even space 
>> them
>> at all for that matter? What do you think?
>>
>> Tony
>>
>>
>> 
>
>
>