For Sale: Complete 4" coil ; 5"x16" toroid on top of 6" toroid ; conical primary ; 60A 15KV transformer and 2.5KVA variac (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Fri, 31 Aug 2007 17:09:43 -0500
From: "westland@xxxxxx" <westland@xxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: For Sale:  Complete 4" coil ; 5"x16" toroid on top of 6" toroid ;
    conical primary ; 60A 15KV transformer and 2.5KVA variac

/*For Sale:  Complete Working Tesla Coil.  I would prefer to sell to 
experienced coilers*/

   1. 4 inch x  22 inch (approx.) Tesla Coil Secondary. It is wound on a
      4 inch PVC form (4.2 Inch OD) and is about 1000 turns of heavy,
      high temp #24 awg wire (HAPT). It's coated with two coats of
      styrofoam. It's approx 24 inches tall with the included insulator
      top load mount. Included are also both end caps. One custom
      external cap for the top and a sturdy 1/4 inch x 1 3/4  internal
      one for the bottom. Also included are (3) 1/4-20 nylon bolts to
      mount the base, one for the center mounting hole and two more for
      the holes you drill through the side wall when you have it in
      final position. Resonate frequency is approx 285 kHz from Tesla Stuff
   2. Control box with John Frau phase shift variac (for synchronous
      rotary gap below),  volt and ammeters, fuses and emergency cut switch
   3. 5"x16" toroid on top of 6" toroid  (both from John Frau) ... looks
      sharp
   4. Conical primary 14 turns of 1/4" copper tubing;
   5. 60A 15KV transformer (2x30a at 50Hz) 220VAC  input
   6. 2.5KVA variac; 110 or 220 VAC input; 0 - 240 output
   7. 15 x CDE 942 Capacitors on Perspex base with flexable tuning
      arrangement  
   8. 10 Meg 1/2 watt Ohm Bleed Resistors + one large 20MV bleed for the
      entire array
   9. Terry Filter with brass discharge balls  :-)  and perspex base
      (From Tesla Stuff)
  10. 2 x Richard Quick Gaps
  11. 1 x synchronous motor rotary gap with 1/4" Tungsten rods and
      Tungsten locking collars from Tesla Stuff; on perspex base
  12. Good looking wooden box (Ikea) which holds Terry Filter, Caps and
      Rotary Gap (all on Perspex bases) very neatly

/*So far around 40" sparks ... email me for pictures

Price $1500

Please email me at westland@xxxxxxx
*/