[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: new secondary....... (fwd)



---------- Forwarded message ----------
Date: Sun, 23 Sep 2007 03:33:43 +0000
From: david baehr <dfb25@xxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: RE: new secondary....... (fwd)


years  ago, I ran an 8" coil,  with a 25" winding length with #20 wire at approx 5Kw input.( seeTCBA News Volume 13,#4 ) Id like to stay with the lower profile (3-1 ).
 
           didnt know what problems id have using that smaller wire .....................> Date: Sat, 22 Sep 2007 17:54:14 -0600> From: tesla@xxxxxxxxxx> To: tesla@xxxxxxxxxx> Subject: RE: new secondary....... (fwd)> > > ---------- Forwarded message ----------> Date: Sat, 22 Sep 2007 17:45:44 -0600> From: S&JY <youngs@xxxxxxxxx>> To: 'Tesla list' <tesla@xxxxxxxxxx>> Subject: RE: new secondary....... (fwd)> > Neondave,> > Using #26 wire, 1200 turns will make a winding length of about 21". 1500> turns is only about 26". If you want longer sparks, you need a longer> secondary, which means you need to use a larger gauge wire, or space-wind it> with your #26 wire.> > Typical coils have a H to D ratio of about 5. So an 8" diameter secondary> should have a winding length of about 40 inches, a 6" secondary should have> a winding length of about 30 inches. Knowing the winding length you need,> you can then use a wire table or WinTesla to determine the wire size you> should use. WinTesla says about 1300 turns of #21 wire takes 40 inches, and> about 1200 turns of #23 wire takes 30 inches.> > As for power, #26 wire should be fine at 3 KW.> > (The other way to use your #26 wire is to build a magnifier and use a huge> toroid on the third coil. If you look in the archives, you can see that a> 10 or 12 inch long third coil can produce 10 foot streamers!)> > --Steve Y. > > -----Original Message-----> From: Tesla list [mailto:tesla@xxxxxxxxxx] > Sent: Saturday, September 22, 2007 4:11 PM> To: tesla@xxxxxxxxxx> Subject: new secondary....... (fwd)> > > ---------- Forwarded message ----------> Date: Sat, 22 Sep 2007 16:15:18 +0000> From: david baehr <dfb25@xxxxxxxxxxx>> To: tesla@xxxxxxxxxx> Subject: new secondary.......> > > Hi, > just looking for a quick opinion , I now run a 4" dia. sec coil , and> in the quest for longer sparks, was gonna wind a 8" coil.> > 3kw max available power. I have plenty of #26 wire, but, maybe to> small for a n 8" coil ??,.....or, with 3kW , I should wind a 6" form ?> > Many Thanks, neondave> _________________________________________________________________> Gear up for HaloR 3 with free downloads and an exclusive offer. It's our way> of saying thanks for using Windows LiveT.> http://gethalo3gear.com?ocid=SeptemberWLHalo3_WLHMTxt_2> > > > > -- > No virus found in this incoming message.> Checked by AVG Free Edition. > Version: 7.5.488 / Virus Database: 269.13.28/1023 - Release Date: 9/22/2007> 1:27 PM> > > > 
_________________________________________________________________
Gear up for Halo® 3 with free downloads and an exclusive offer. It’s our way of saying thanks for using Windows Live™.
http://gethalo3gear.com?ocid=SeptemberWLHalo3_WLHMTxt_2