[TCML] using larger secondary wire for the base

[Scott Bogard <teslas-intern@xxxxxxxxxxx>]

Hey all,
     Quick question, I was trying to figure out a better way to attach 
my secondary to my ground and I thought of an idea.  Basically there is 
a danger of snapping off the secondary wire if I solder a heavier cable 
directly to the thin 22 AWG wire, unless I wrap a few turns of the 
heavier wire around the base and secure it so that I can solder them 
together and have no fear of the joint breaking in case something gets 
jiggled.  Is this a bad idea, I don't really see how, but I've never 
heard of anyone actually doing this.  Assuming I use two turns or so the 
inductance change should be negligible.  Thanks.

Scott Bogard.


_________________________________________________________________
Get in touch in an instant. Get Windows Live Messenger now.
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_getintouch_042008_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla