RE: [TCML] 1,000uF 250V pulse cap needed

["Jim Mora" <wavetuner@xxxxxxxxx>]

Chris,

I was thinking that. Just go to a camera shop and tell them you want some
throw away cameras for your hobby... They remove the film for development
and recycle the rest. Be sure to discharge them, they hold a charge a long
time and have a nasty bite!

Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of FIFTYGUY@xxxxxxx
Sent: Thursday, August 07, 2008 3:16 PM
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] 1,000uF 250V pulse cap needed

Chris-
 
    Howzabout photoflash caps? $10 worth of these gets  you where you need
to 
be:
 
_http://www.goldmine-elec-products.com/prodinfo.asp?number=G14806_ 
(http://www.goldmine-elec-products.com/prodinfo.asp?number=G14806) 
 
    The tricky thing might be getting them to survive  the duty cycle of 
100-500 pulses per second. But cheap enough to give it a  try!
 
-Phil LaBudde
Center for the Advanced Study of Ballistic  Improbabilities



**************Looking for a car that's sporty, fun and fits in your budget? 
Read reviews on AOL Autos.      
(http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000
017 )
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla