[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Rectifying a Tesla coil



bsneath@xxxxxxxxxxxxxxxx wrote:

On Fri 29/08/08 11:26 PM , jhowson4@xxxxxxxxxxx sent:
Is it possible to rectifiy a Huge tesla coil?

No reason I was just curious.



What about building a rectifier from scratch out of a fluro tube? A 4' long tube should hold off a megavolt or two... It would be a fairly simple task to remove one of the filaments and replace it with a anode plate, then pump it down to a hard vacuum (or abouts). Why go solid state? Although i cant imagine what the response time on something like that would be... just a thought...


In fact, the book by Craggs & Meek has a photograph of a large voltage multiplier with, as I recall, 600kV/tube. They're continuously pumped.

There were also various and sundry X-ray machines made with 1MV scale potentials, but in some cases, they didn't actually have a rectifier. They just used the fact that a X-ray tube is unidirectional (sort of like how the voltage doubler in a microwave oven uses the fact that the magnetron is a diode)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla