[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Sphere Topload Coil





Gary Weazle has them, also I think they are in the archives.

Dr. Resonance



>
> I'll have to read up on this, or do you have any plans for this gap ?
> Thanks :-)
>
>
>> Date: Tue, 19 Feb 2008 10:08:13 -0700> Subject: RE: [TCML] Sphere
>> Topload Coil> From: resonance@xxxxxxxxxxxx> To: tesla@xxxxxxxxxx> CC: >
>> > > > > This is a good coil design. Switching to a hyperbaric type spark
>> gap will> improve your performance. Hyperbarics work great at higher
>> power levels,> ie, 2-4.5 kVA.> > Dr. Resonance> > > > >> > Hi, just your
>> basic Ol' coil : 4" dia sec wound to 24" , #26 wire> >> > Pri.- .25"
>> copper tube /flat spiral> > ...1.25" spacing from the sec.,> > .25"
>> spacing bettween turns (12> > total ),> > tapped at the 11th turn> >> >
>> homemade poly oil caps (TCBOR> > ) APPROX .028mfd (this is a> >
>> guesstament , I dont have a> > cap meter> > right now.> >
> _________________________________________________________________
> Helping your favorite cause is as easy as instant messaging. You IM, we
> give.
> http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join_______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>


Dr. Resonance

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla