[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Spark gap



You can always do like me and build more than you
think you need. I built two rows of ten 3/4" pipes (18
gaps total) that I could easily series in order to get
the total gap that worked best. I had .035" gaps, for
a total gap spacing of .63", which is more than you
should ever need.

http://www.hot-streamer.com/adam/TCBOR_gap1.jpg

http://www.hot-streamer.com/adam/TCBOR_gap2.jpg

Adam

--- Vinnie <teslatech@xxxxxxxxxxx> wrote:

> Hello People
> 
> 
> While everyone is on this subject.
>  How does one determine the number of gaps and
> spacing between each segment 
> in a cylindrical R.Q.S.G?
> It seems like from what I read that if you don't
> have enough gaps that's bad 
> and if you have too many that's also bad.
> Is there anyway to determine what is actually
> needed? Is it determined by 
> your input voltage or you cap or a combination
> of both?
> 
> Thanks for your time.
> 
> Vinnie
> 



      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla