[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Arizona Teslathon



Information for the Arizona Western Winter Teslathon next Saturday can be found at  http://www.audiotesla.org/Drspark/Teslathon2008.htm

Hope to see you there!

dr.hankenstein@xxxxxxxxxxxxx
"We put the fire in the wire."


> [Original Message]
> From: <penny831@xxxxxxxxxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Date: 2/23/2008 11:24:35 AM
> Subject: [TCML] Arizona Teslathon
>
> Wow, the Teslathon is almost here. Where is it being held again? I'd love to be there.
>
> Thank you,
> Tony
>
> -----Original Message-----
> >From: Jim Mora <jmora@xxxxxxxxxxx>
> >Sent: Feb 23, 2008 1:31 AM
> >To: 'Tesla Coil Mailing List' <tesla@xxxxxxxxxx>
> >Subject: RE: [TCML] Spark gap
> >
> >David,
> >
> >Are you going to the Arizona Teslathon March 1? I'll bring mine for you to
> >experiment with. I'm not using it presently. I am trying out a 6 gap CU pipe
> >flat set blown with a pair of flat blowers and am trying to get my machinist
> >to finish my rotary. I am catching a ride out there and flying back to
> >Burbank. Otherwise, I can ship it to you. You can melt it down if you can 
> >:-)
> >
> >Jim Mora 
> >
> >-----Original Message-----
> >From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
> >Of david baehr
> >Sent: Friday, February 22, 2008 4:36 PM
> >To: Tesla Coil Mailing List
> >Subject: RE: [TCML] Spark gap
> >
> >
> >anyone here in Northen CO have one of these single air blast gaps we could
> >try on my coil ??
> > 
> >  not sure if my copper pipe gap is as good, (what kind of spark increase
> >can one expect ? )
> > 
> >      mine is pretty stable,... from a cold start,...i could go make a
> >sandwich , come back, and performance wouldnt have changed much
> > 
> >        my mounting is a bit diff from others also,....i can just pick up a
> >pipe, clean it/ rotate it , lay it back down , and its ready to go
> >again,....but id like to try one ....
> > 
> > 
> >> Date: Fri, 22 Feb 2008 17:24:13 -0500> From: hallam@xxxxxxx> To:
> >tesla@xxxxxxxxxx> Subject: Re: [TCML] Spark gap> CC: > > Hi Scott,> I
> >absolutely don't have any data supporting that claim. It's really just>
> >"received wisdom" :)> > One of the problems with the classic RQ gap is that
> >unless it's baffled> correctly, most of the airflow goes through the copper
> >pipes and through the> large central gap, with relatively little going
> >through the tight space > between> the pipes. This is just fine for cooling
> >but not so great for air-blast style> quenching. Though of course, cooling
> >does help with quenching.> > Henry> > Quoting huil888
> ><huil888@xxxxxxxxxxxx>:> > > Henry -> >
> >_________________________________________________________________
> >Climb to the top of the charts! Play the word scramble challenge with star
> >power.
> >http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan__
> >_____________________________________________
> >Tesla mailing list
> >Tesla@xxxxxxxxxxxxxx
> >http://www.pupman.com/mailman/listinfo/tesla
> >
> >
> >
> >_______________________________________________
> >Tesla mailing list
> >Tesla@xxxxxxxxxxxxxx
> >http://www.pupman.com/mailman/listinfo/tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla