Re: [TCML] Secondary Troubles

["Phillip Slawinski" <pslawinski@xxxxxxxxx>]

Well in this case I'm not sure if I'll be keeping this secondary, so I don't
want to permanently attach my end caps.  I have some bubbles in the finish,
and a bad spot at the bottom.  On top of that there are some tracks on the
inside now.

On Sat, Jul 5, 2008 at 3:11 PM, <Sfxneon@xxxxxxx> wrote:

> Glue 'em! An arc can find even a microscopic opening  and flashover in an
> instant. The seal needs to be absolutely  air tight.
>
> Tony Greer
> *************
>
> In a message dated 7/5/2008 2:16:30 P.M. Central  Daylight Time,
> pslawinski@xxxxxxxxx writes:
>
> Still here.  I'm actually having baffles machined.  They'll  be press fit,
> no
> glue required.  I'm getting some nice brass pieces  machined for the
> secondary grounding/height adjustment.
>
>
>
>
> **************Gas prices getting you down? Search AOL Autos for
> fuel-efficient used cars.      (
> http://autos.aol.com/used?ncid=aolaut00050000000007)
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla