[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] NVM on previous questions, finally got this working



I see your breakout point is getting quite hot in this run.  Very neat
looking spark by the way.

On Thu, Jul 10, 2008 at 5:59 AM, TheBypasser <bypasser@xxxxxxx> wrote:

> Finally got the project working. Found both patience to set up the correct
> deadtime with a half-ruined scope and courage to remove the ballast while
> running 240vac. As posted above, it's a no-gdt system with feedback and full
> bridge. No blows \o/.
> Here's a short clip on YouTube and a few pics.
> http://www.youtube.com/watch?v=FP3sVKbKsM4
> http://i8.photobucket.com/albums/a44/TheBypasser/090720081022.jpg
> http://i8.photobucket.com/albums/a44/TheBypasser/090720081029.jpg
> http://i8.photobucket.com/albums/a44/TheBypasser/090720081019.jpg
> http://i8.photobucket.com/albums/a44/TheBypasser/090720081021.jpg
> http://i8.photobucket.com/albums/a44/TheBypasser/090720081031.jpg
> http://i8.photobucket.com/albums/a44/TheBypasser/090720081030.jpg
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla