[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Rolling thin wall tubing into ribbon



Hi Group,



Has anyone ever tried to make a jig to roll tubing through a set of steel
rollers or smooth pipe rollers spaced to take advantage of flat pancake and
retain a rounded edge to reduce corona? Ha ha, maybe a flatbed and a lawn
roller full of oil would work :-^) Rounded ribbon is expensive.



Jim Mora"

	Unless the rollers were aligned perfectly and the tubing was fed through them very carefully you'd end up with curled ribbons!  [I realize you proably weren't serious............]

Ed


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla