[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Panel Meters



And yes, shunts can be home-brewed easily. I did this with a couple meters that required external shunts. I used thin brass sheets and drilled two holes to match the meter bolts. I then used scissors to cut out the shunts. I measured current with a digital meter on a load and then hooked up the meter with the homebrew shunt and cut and filed away at the strip of brass sheeting until the current matched the meter. Pretty easy to do.

Take care,
Bart

William Noble wrote:
I have a pile in my garage - if you can make your own shunts/dividers I may be able to help - contact me off the list> Date: Tue, 24 Jun 2008 23:53:28 -0500> From: pslawinski@xxxxxxxxx> To: tesla@xxxxxxxxxx> CC: > Subject: [TCML] Panel Meters> > Does anyone know a good source for [analogue] panel meters?> _______________________________________________> Tesla mailing list> Tesla@xxxxxxxxxxxxxx> http://www.pupman.com/mailman/listinfo/tesla_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla