Re: [TCML] More tc info

[bartb <bartb@xxxxxxxxxxxxxxxx>]

Hi Reuben,

Matt gave some great tips. Something I'm curious about is your 
secondary. You state that it is plastic insulated wire. Is this hook up 
wire of sorts? If so, the insulation will be quite thick as opposed to a 
normally used magnet wire for a secondary which will greatly reduce the 
turns. Can you count the number of turns within a 1" length and let us 
know how many you counted?

Take care,
Bart

rmferaligator@xxxxxxx wrote:
> The coil has a 15kv 30ma transformer
> Primary is 6 turns of 10 awg plastic insulated copper wire with each turn on top of each other the form has a diameter of 5 inches. The secondary sits In the center of the primary the secondary is an uncountable number of turns of 28awg plastic insulated wire the form is 7 inches tall 2 inches wide. The terminal is two 1 foot diameter stainless steel bowls soldered together the cap is salt water that is saturated with salt
> With glass boylan ginger ale bottles
> With galvanised bolts. Linked together
> With copper strips.. The spark gap(not to be confused with The safety gap)
> Is composed of two "L" brackets with stainless steel bolts w/ end caps
> I hope this helps
>
> Cheers,
> Reuben
> Sent from my Verizon Wireless BlackBerry
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
>
>   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla