Hi DC,We've talked about this not to long ago. There is already a multiplier inserted, but it is based on secondary diameter. What we didn't have were estimates for the smaller secondary coil sizes. You mentioned that you might have a chance to check this out this summer? Javatc uses both John's formula and incorporates your factors as per the write up you created. It's just that the smaller coils need some attention.
Take care, Bart DC Cox wrote:
I also wanted to mention that I have used JAVATC for a lot of coils over the past 2 years, and I always have to multiply the spark output by 70% to get the accurate spark length value. You might consider adding this just before it prints the output in the spark length section. I would make it immensely more accurate. The tuning seems to be very accurate, usually within 1/4 turn on every app I have run. Regards, DC
_______________________________________________ Tesla mailing list Tesla@xxxxxxxxxxxxxx http://www.pupman.com/mailman/listinfo/tesla