[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Tube coils structure



I have not gotten around to using push-pull. I like the idea of four
304TL's in parallel push-pull. The advantage of P-P is each toob
delivers power for half each cycle. Where as single-ended only conducts
for half of each cycle. I haven't finalized the design yet. Keep us
posted. James

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
Behalf Of David Rieben
Sent: Wednesday, October 08, 2008 9:21 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Tube coils structure

Hi John,

I now only have a single 833(C) and a single 833(A).
I have temporarily lashed the 833A in parallel with the
^) just to see how well the extra tube would
share the load. It does indeed "spread the load". I am
assuming that a "push-pull" setup means the tubes are

Some snippage:

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla