[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] JAVATC primary inductance calculator



Steve,

thanks for that, It was going to be my next question to the list!

Chris



----- Original Message ----- From: "S&JY" <youngs@xxxxxxxxx>
To: "'Tesla Coil Mailing List'" <tesla@xxxxxxxxxx>
Sent: Sunday, September 07, 2008 3:39 AM
Subject: RE: [TCML] JAVATC primary inductance calculator


Chris,

For a lower inductance primary, have you considered locating it INSIDE your
secondary?  This is how Electrum was built, and it obviously worked fine!
See http://www.lod.org/Projects/electrum/construction/index.html

Steve Y.

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Chris Swinson
Sent: Saturday, September 06, 2008 1:13 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] JAVATC primary inductance calculator

Hi Bart,


My meter I doubt will go below 1uH. Its a problem to read 10uH, maybe 1uH,
but its not going to measure any lower (no more digits!)

Parallel turns may work, would help with resistance also I suppose. Though
as each progressive layer will be a fraction longer, its hard to say how
this will effect the current profile though each inductor. at 10KA and 2
layers, I don't know if the current will favour the inner turn as its less
resistance than the outer turn....

I am currently working down to 0.0000146ohms. Is it possible to get anymore
accuracy in your flat ribbon calculator ? maybe down to several decimal
places ?


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.17/1657 - Release Date: 06/09/2008 20:07

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla